|Constructing High-tensile Wire Fences||
High-tensile wire fence is an effective barrier for controlling and protecting livestock. Some advantages of this type of fence include ease of handling, minimal maintenance, and high strength. High-tensile wire fence can be easily electrified and will outlast most other fences. Building a high-tensile wire fence that will provide years of service requires proper construction techniques. Unfortunately, many farmers consider fence building a low priority. The result is a poorly built fence that is a waste of time and money. Every fencing job presents slightly different problems. However, the application of a few basic principles of fence construction can result in well-built fence. This publication discusses the basic components of high-tensile wire fence construction.
|May 1, 2009||442-132|
|Control of Common Pasture and Hayfield Weeds in Virginia and West Virginia||
Annual and perennial weed control in pastures and hayfields is an important aspect of successful forage management. This publication will discuss control measures for many of the common weeds found in Virginia and West Virginia permanent fescue and mixed fescue / bluegrass / orchardgrass pastures and hayfields.
|May 1, 2009||427-002|
|Fencing Materials For Livestock Systems||
Good fencing protects and confines valuable livestock by presenting barriers to restrict animal movement. Barriers may be physical, psychological, or a combination of both. Physical barriers consist of enough materials of sufficient strength to prevent or discourage animals from going over, under, or through the fence. Psychological barriers depend upon inflicting pain to discourage animals from challenging a physical barrier of inferior strength.
Traditional livestock fencing materials have included barbed, woven, mesh, and electrified wire, and combinations of these materials. Board fences have also been popular. These conventional materials are still widely used and make excellent fences if properly constructed. However, new materials such as high tensile wire should also be considered when selecting fencing types.
|May 1, 2009||442-131|
|Manure Spreader Calibration for Rear-discharge Equipment -- Handling Solid and Semi-solid Manures and Poultry Litter||
To maximize crop productivity and minimize adverse environmental effects, it is critical that land applications of manures meet, but not exceed, crop nutrient requirements. To assure that the actual manure application rate matches the desired application rate, manure-spreading equipment must be calibrated. The goal of manure spreader calibration is to determine the amount of manure, on a weight per unit area basis, that is being applied to a field. This publication describes three methods for manure spreader calibration for spreaders handling solid and semi-solid manures.
|May 1, 2009||442-004|